MOTOR DRIVEN OIL FIRED
CLEANERS
DAILY
EACH
HR
FIRST
8 HRS
AFTER
FIRST
50
HRS
EVERY
50
HRS
EVERY
100
HRS
EVERY
500
HRS
YEARLY
OIL BATH WATER PUMP:
Oil Level – check and add as needed per
PUMP SERVICE insert.
Oil Change – drain and refill per PUMP
SERVICE insert. CAUTION: Used oil must
be disposed into an environment safe
container and brought to an oil recycling
center.
Oil Contamination – Milky color indicates
water
HOSES:
Blistering, Loose Covering
Abrasion of cover exposing
reinforcement.
Cuts exposing reinforcement
BELTS:
Cracks or fraying
Belt Tension - For correct belt tension,
see MACHINE MAINTENANCE insert.
FILTER – WATER:
Check water inlet hose screen for debris
Check float tank screen for debris
SPRAY TIP:
Check Tip for debris.
FUEL:
Adequate fuel supply.
FILTER—FUEL:
If contaminants are present see FUEL
FILTER insert.
Remove and Replace fuel filter per FUEL
FILTER insert.
SCREEN—FUEL:
Check fuel pump screen for debris see OIL
BURNER MAINTENANCE insert.
BURNER NOZZLE:
Replace Nozzle as specified in BURNER
section of MODEL SPECIFICATIONS or
BURNER ASSEMBLY insert.
GUARDS AND SHIELDS:
Check that all guards and shields are in place
and secure.
PUMP MOTOR WITH GREASE
FITTINGS:
Remove drain plug. Use 1 or 2 full strokes of
shell “DOLIUM RB”, Chevron “SR1 No. 2” or
Texaco “PREMIUM RB:. Operate for 20
minutes and replace drain plug.
MACHINE MAINTENANCE
09-17-03 Z08-02830G
ECN-02981
10
To Next Page
Loading...
