EasyManua.ls Logo

ALKOTA 3182 - Page 38

Default Icon
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Warranty Policy
Machines are guaranteed to be free from defects in material or workmanship under normal use and service for
period of one year after delivery from the factory. Any part (other than vendor items) that is determined to be
warranty will be repaired or replaced at NO CHARGE provided the warranty registration form is filled out in its
entirety and the part is sent back freight prepaid. Any replacement parts accepted as warranty will be returned to you
freight prepaid.
Our heating coil will carry a seven-year prorated warranty credit. The manufacturer will repair or replace the coil
without charge for five years after delivery date from the factory for any defect in the coil that was caused by
workmanship or defective steel. After the five years have expired, the credit will be prorated as follows:
First 5 years 100% Credit
Years 6 & 7 50% Credit
After 7 Years No Credit Allowed
All parts supplied to us by other manufacturers will be subject to their guarantee and warranty. Generators, motors,
and engines are required by vendors to be repaired or replaced by authorized warranty repair stations. The
manufacturer will assist you in locating warranty stations around the country in cases where that is necessary. Select
items carry a six-month warranty such as unloaders, triggers guns, etc.
The manufacturer, at its option, will repair or replace defective parts only, and does not allow for field labor charges
for removal, installation, analysis, travel expense, or special freight expenses incurred for replacement parts.
Warranty does not apply to normal wear and tear including, but not limited to, freezing damage, freight damage,
damage caused by misuse or misapplication, chemical related failures, contaminated filters and screens, moisture
related fuel pump failures, stuck check valves, pump packings or seals, nozzles or orifices, paint, hoses, and gauges.

Related product manuals