Name and function of each part
Can open the door at anytime only
by pulling down this handle
Push up to open the battery cover
˙[N] : Registration or deletion of PIN
code, Card and Fingerprint in
normal mode
˙[S] : Registration or deletion of PIN
code, Card and Fingerprint in
safety mode
˙[
] : Registration or deletion of
optional RF communication
pack
Door will be locked automatically
after closing
Door will be locked by pressing
manual lock button after closing
Button to lock the door manually
Button to set double locking mode
1.
Front Ass`y
2.
Back Ass`y
Name Product specication Remark
① Front Ass`y
84mm(W)
X
260mm(H)
X
21mm(D)
Including rubber pad
②
Back Ass`y
82mm(W) X 242mm(H) X 34mm(D)
③ Back bracket 70mm(W) X 119.5mm(H) X 6.6mm(D)
④ Mortise lock 105.4mm(W) X 240mm(H) X 24mm(D)
⑤ Strike 24mm(W) X 240mm(H) X 4.5mm(D)
⑥ Strike housing 24mm(W) X 239.8mm(H) X 19.5mm(D)
⑦ Handle shaft 101.7mm(W) X 8mm(H) X 8mm(D)
⑧ Card key ISO card, Tag key, Mobile tag key
⑨ Handle shaft clip 2 EA
⑩ Override key 3 EA
⑪ Battery 1.5V 'AA' Size LR6 Alkaline, 4ea(DC 6V)
⑫ Screws 1 set
⑬ User manual
Main User manual
⑭ Installation template
Using for making hole at the door
⑮ Communication pack
Communication pack
Optional
⑯ Remote key Remote key Optional
※ Installation condition Door thickness 40~80mm
It facilitates escape with a simple action of lever down.
The product can be installed in a left or right handed configuration.
If users do not open the door after unlocking the device it will
lock itself automatically.
8 levels of volume.
Door will not emit any sound when mute is activated.
Easy to check battery status with three step level indicator and alarm
when battery replacement is required.
When the door is opened by force an alarm will sound.
After multiple incorrect attempted entries an alarm will sound and all
the functions of the lock will be suspended for three minutes. The alarm
activated after three incorrect PIN/card entries.
Automatically deleting old PIN code or card key information
when registering new one.
When you enter your home with other people, you may not
want to show PIN code to them. In this case, you may press
any numbers randomly without limitation and then enter your
PIN code at the end.
When the door is closed, it will be locked automatically in auto
lock mode.
Can open the door by pushing down
it after unlocking with Fingerprint,
PIN code or Card key
Indicate operation status and
checking battery capacity
˙
Remaining battery 20%
˙ Remaining battery 50%
˙
Remaining battery 80%
Unlock the door with override
key manually
When battery does not operate,
product may be operated and
unlocked by contacting a 9V battery
on terminal located outside
Touch the registered card key to
unlock the door
① ③②
⑭
Screws
User
manual
⑬
④
⑤
⑩
⑫
⑪
Installation
template
Factory setting
Item Setting Status Ref.page
Auto/Manual lock mode [Auto-lock] 8
Beep sound level (1~8 level) 8 level 7
Factory setting PIN code 123456 -
Indicate lock / unlock status
When the battery is low, the
red light blinks. Please change
batteries
USER MANUAL
Notice
Please read this manual before installation and
operation.
Safety precautions
Product features
Disassembling the door lock may damage the product. Damages to
the product caused by unauthorized persons may void the warranty.
Please remove the batteries immediately from the product, if you
do not take this step immediately, the product may suffer severe
damage.
If the product is exposed to water or liquids, please wipe the
moisture off with a soft cloth. If moisture or foreign materials
penetrate the product, remove the batteries immediately.
If leakage is discovered, please wipe out with a dry cloth and replace
with new batteries. In case of exposure to leakage, wash affected
skin area with soap and water immediately.
Such materials may damage the surface of the lock or cause a fire.
Do not use damaged batteries.
It may damage the product or cause a malfunction.
It may damage the product or cause a malfunction.
The battery life is getting shorter and it may cause leaks or
explosion.
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment of installation
area. Heavy dew condensation may damage the product or cause a
malfunction.
Product composition and components
Remote key
(RP-20)
Optional parts
⑯
ISO
CARD
Tag
key
M
key
Touch the registered fingerprint on
the sensor to unlock the door
⑧
⑨
⑦⑥
English
3"sec
3 MC
or
#
1
Chinese
2
How to select the language
⑮
Communication pack
(RXP-10)
To Next Page
Need help?
General
