Allegion SCHLAGE NDEB User Manual

*P519-087*
P519-087
NDEB Wireless Lock
Para Español, vaya a la página 9.
Pour le Français, voir la page 9.
Installation Instructions
Cylinder Options
Full Size IC (FSIC)
Small Format (SFIC)
Standard Cylinder
Pin wrench
* Components shared with
ND-Series lock.
alle.co/nde
Access online interactive instructions,
user guide, warranty, and reference
information.
Latch*
Cylinder*
Backplate
Door Jamb
DPS
Spring Cage*
Inside Lever*
Battery Cover
Battery Cover
Screw
Battery Strap
Escutcheon
Screws
Inside
Assembly
Outside Lever*
Outside Assembly
Key
Ribbon Cable
Battery Holder
Chassis
Mounting
Screws*
Door Edge
DPS
Strike
Dust Box
ANSI Strike
T-Strike
Strike Options
Installation Preparation
Tools Needed
• Phillips screwdriver
• Pin wrench
Optional
• T-15 Tamper Torx screwdriver
Door preparation:
See template in
package.
Contact Product Support
1-877-671-7011.
ENGAGE™ WEB & MOBILE APPLICATIONS
Search for “Allegion ENGAGE” in the Apple App Store or
Google Play store to download the app.
Navigate to portal.allegionengage.com to access your
account online.
IMPORTANT NOTES
• Included strike and sensor must be installed for the door
position sensor to work properly.
The sensor is used to indicate door position.
• Install and test lock with door open to avoid being locked
out.
• Check door preparation with included template, and
prepare door before starting installation. If you have a lock
on your door already, remove completely before beginning.
• If you are updating from an NDE80 lock, remove
completely, and reinstall with supplied parts.
Customer Service
1-877-671-7011 www.allegion.com/us

Allegion SCHLAGE NDEB Specifications

General

Brand	Schlage
Model	NDEB
Type	Electronic Deadbolt
Category	Door Locks
Power Source	Battery
Key Override	Yes
Access Method	Keypad, Mobile App
Battery Type	4 AA Batteries
Keyway	Schlage C
Warranty	Limited Lifetime
Compatibility	various access control systems
Door Thickness	1-3/8" to 2"
Backset	2-3/4"
Handing	Reversible
ANSI Grade	1
Connectivity	Bluetooth® and/or Wi-Fi (depending on configuration)

Summary

Installation Instructions

Installation Preparation Steps

Steps and tools required before starting the lock installation process.

ENGAGE App and Portal

Information on downloading and accessing the ENGAGE mobile app and web portal.

Key Installation Notes and Warnings

Key considerations and warnings for successful lock installation and operation.

Door Thickness Adjustment Guide

1 3/4" Door Thickness

No adjustment is required for doors of this thickness.

15/8" and 2" Door Thickness Adjustment

Steps to adjust the lock chassis for thicker doors.

Outside Assembly Installation

Outside Assembly Preparation

Steps to prepare the outside assembly before mounting.

Chassis Cable Connection

Routing and connecting the ribbon cable for the chassis.

Inside Assembly Installation

Door Assembly Alignment and Installation

Aligning the lock assembly with the door and installing it.

Backplate and Cable Routing

Installing the backplate and routing the ribbon cable.

Door Position Sensor (DPS) Installation

Installing the door position sensor on the door edge.

Cylinder and Lever Installation

Lever Removal Procedure

Instructions on how to remove levers from the lock mechanism.

Standard Cylinder Lever Installation

Steps for installing levers with a standard cylinder.

Interchangeable Core Cylinder Lever Installation

Steps for installing levers with an interchangeable core cylinder.

Non-Keyed Lever Installation

Instructions for installing a non-keyed lever.

Battery Installation

Battery Holder Setup

Steps for inserting batteries into the battery holder and connecting the cable.

Power On Self-Test (POST) Procedure

Explanation of the lock's automatic self-diagnostic test upon battery connection.

Door Position Sensor (DPS) Testing

Verifying the proper operation of the door position sensor after installation.

Factory Default Reset (FDR)

FDR Initiation Steps

Steps to perform a factory default reset on the lock.

FCC Compliance Statement

FCC Equipment Modification Caution

Warnings and precautions regarding changes or modifications to the equipment.

UL Compliance Statements

Lever Locking and Egress Behavior

Information on lever locking behavior and egress.

User Guide Information

Factory Default Reset (FDR) Procedure

Steps to perform a factory default reset on the lock.

UL Performance and Safety Standards

UL294 Performance Levels

Details on UL 294 performance levels for standby power.

FCC Radio Frequency Statement

FCC Interference and Modification Precautions

Warnings and precautions regarding changes or modifications to the equipment.

Industry Canada Radio Compliance

Industry Canada regulations for radio transmitters and exposure.