ALLEN & HEATH ME 500 - Introduction to the ME System

User Guide – AP11137 iss.1 4 ALLEN&HEATH
1. Contents
1. Contents ................................................... 4
2. Introduction .............................................. 7
3. Front Panel ............................................... 8
4. Rear Panel ................................................ 9
5. Installing ME-500 .................................... 10
5.1 Mounting the unit ............................. 10
5.2 Cat5 cable ........................................ 10
5.3 Ethernet PoE Switch ........................ 10
5.4 Connecting audio ............................ 11
6. Using ME-500 ......................................... 12
6.1 Powering up the mixer .................... 12
6.2 Dimmer ............................................ 12
6.3 Standby ............................................ 12
6.4 Mapping channels to keys .............. 12
6.5 The display ...................................... 13
6.6 Adjusting Master level ..................... 13
6.7 Working with Channels ................... 13
6.8 Working with the Master .................. 13
6.9 Setting the output limiter ................. 13
6.10 Trimming all levels ........................... 13
6.11 ME-500 Presets ............................... 14
6.12 USB Preset transfer ......................... 14
6.13 Recalling Presets ............................. 14
6.14 Storing Presets ................................ 14
6.15 Clearing all mix settings .................. 14
6.16 Hard Reset ....................................... 14
6.17 Specification .................................... 15
Further information
Please refer to the Allen & Heath website for
further information, knowledgebase and
technical support. You can join our Allen &
Heath Digital Community to share knowledge
and information with other ME users.