ALLEN & HEATH SQ - DSP FX Board LED Status

DSP FX LEDs
1
2
3
4
1. +3V3 rail Green LED.
On Solid = Power Good
2. DSP Program indicator Yellow LED (U16A
& U16B)
On Solid = DSP Programmed
3. Prog OK = FPGA Programmed.
Blue LED displays heart beat pattern.
4. Link OK = HSL status Green LED.
On Solid = Link OK
ERROR = HSL Error indicator Red LED.
On solid = Error, Off = Good
Illuminates for 5 seconds during power up.