ALLEN & HEATH Xone:K2 User Manual

Allen & Heath 10 XONE:K2 User Guide
FRONT AND REAR PANEL CONNECTORS
1 2
3 4
1
Audio Connectors
RCA Phono connectors for connecting to an external device such as a mixer or
amplifier.
2
X:LINK In Socket
RJ45 socket for proprietary connection to another X:LINK enabled Xone device.
4
USB Connector
Socket for connecting the Xone:K2 to the PC/Mac.
3
X:LINK Out Socket
RJ45 socket for proprietary connection to another X:LINK enabled Xone device.
1
1
Headphones Output
Stereo 3.5mm mini-jack. Plug in good quality stereo headphones intended for DJ
monitoring. Use closed-ear headphones that provide maximum acoustic isolation
when cueing your sources. We recommend that you use high quality headphones
rated between 30 to 100 ohms impedance. 8 ohm headphones are not
recommended.
Warning ! To avoid damage to your hearing do not operate the headphones or sound
system at excessively high volume. Continued exposure to high volume sound can cause
frequency selective or wide range hearing loss.
Ensure that the headphone level in your DAW is turned to an appropriately low level
before connecting headphones.

ALLEN & HEATH Xone:K2 Specifications

General

Sample rate	48 kHz
Channels quantity	4 channels
Digital sound processing	- bit
Headphone connectivity	6.3 mm
USB 2.0 ports quantity	1
DJ mixer	Yes
Product color	Black
Video capability	No

Weight and Dimensions

Depth	358 mm
Width	135 mm
Height	30 mm
Weight	1000 g