ALLEN & HEATH Xone VF-1 - Installing the Unit

XONE VF-1 User Guide 19
Installing the Unit
19” rack mount
The VF-1 fits into a standard 19” rack system taking up 1U height. Use M6 bolts with plastic protective
cups. These are usually supplied by the rack manufacturer.
Plinth or furniture mount The VF-1 can be mounted in a custom built plinth or other furniture. Use the cutting
template details shown here. The dimensions allow clearance for the cover fixing screws. Secure with suitably long M6 bolts
and nuts. Use protective cups to protect the unit’s surface.
Allow adequate ventilation around the unit. Do not obstruct the top cover ventilation slots.
16mm (
5
/
8
“)
20mm (
25
/
32
“)
217mm (8
17
/
32
“)
233mm
(
9
3
/
16
“
)
CUTOUT 434mm (17
3
/
32
“) X 40mm (1
18
/
32
“)
4x M6 bolt clearance (dia 7mm)