22 XONE VF-1 User Guide
Using MIDI to Link VF-1 Units
For more dramatic effects two XONE VF-1 units can be connected together to make a stereo 24dB/Octave
system. Connect a MIDI cable from the MIDI Out of the first VF-1 (master) to the MIDI In of the second (slave).
Press in the rear-panel Local Off switch on the slave to allow it to respond to MIDI In messages. The slave VF-1
will now follow the filter type, cut-off frequency and filter on/off settings of the master. Switch both the master
and the slave to MONO using the rear-panel switch on each. Now route one channel through the master and
the second channel through the slave.
VF-1
VF-1
To Next Page
Loading...
