ALLEN & HEATH ZEDi-10 User Manual

ZEDi-10 / ZEDi-10FX
10 Channel Live + Recording Mixer User Guide
Thank you for purchasing this Allen & Heath ZEDi-10 or ZEDi-10FX!
We recommend that you read all of this user guide to get the best from your mixer and after
reading, please keep this safe for future reference.
Included in this package is:
 ZEDi-10 / ZEDi-10FX Mixer.
 IEC C5 Mains Power Cable. Please check correct mains plug is fitted for your country.
 USB A-B Cable 2M.
 This User Guide!

ALLEN & HEATH ZEDi-10 Specifications

General

Channels quantity	10 channels
Digital sound processing	24 bit
DJ mixer	No
USB port	Yes
Product color	Black, Grey
Master (XLR) out	2
Headphone connectivity	6.3 mm
USB 2.0 ports quantity	1
Equalizer bands quantity	3

Weight and Dimensions

Depth	274.3 mm
Width	332.7 mm
Height	96.5 mm
Weight	2200 g

Summary

Get to know your mixer

MONO INPUT CHANNELS (M)

Details controls and features of mono input channels, including gain, EQ, sends, and routing.

STEREO INPUT CHANNELS (ST)

Explains stereo input channels, their connections, gain, EQ, sends, and routing options.

MASTER SECTION

Covers main outputs, aux/FX outputs, master controls for monitors, headphones, and main mix.

ZED FX Multi Model Processor

EFFECTS SECTION

Describes the built-in FX unit, its controls, and how to apply effects like reverb and delay.

ZEDi USB Audio Interface

USB AUDIO INTERFACE

Details the 4-in/4-out USB audio interface, connections, and source selection.

Troubleshooting USB Audio Interface problems

Provides solutions for common USB interface issues like pops, clicks, latency, and feedback loops.

Good Practice

"Zeroing"

Explains the initial setup procedure of setting controls to zero to prevent damage.

Connect mics, instruments and other equipment

Connecting Microphones

Guide to connecting microphones and DI boxes, including phantom power requirements.

Connecting Instruments and Line-Level Equipment

Instructions for connecting instruments and line-level sources to various inputs.

Get the best sound

Gain Structure

Essential guide to setting input gain for optimal signal quality and noise ratio.

Shaping Sound

How to use EQ filters (lo-cut, HF, MF, LF) to adjust tonal characteristics of signals.

Balancing the Mix

Techniques for balancing channel levels, using PAN, and managing overall mix loudness.

Applying Effects to the Mix (ZEDi-10FX only)

Steps for applying and adjusting built-in effects to enhance the audio mix.

Application examples

Important Safety Precautions

General Safety Advice

Covers water/moisture, ventilation, heat, servicing, installation, power, grounding, and cover removal.