Allen-Bradley 1305-BA04A - Page 75

Programming
5-7
Metering Group (continued)
[Drive Tem
p
]
Parameter # 70 Factory Default None
[Drive
Temp]
Parameter Type Read Only Minimum 0
This parameter displays the drive internal temperature. Units 1_C Maximum 100_C
[Last Fault]
Parameter # 4 Factory Default None
[Last
Fault]
Parameter Type Read Only Minimum 0
This parameter displays the fault code for the present drive
fault. If there is no active fault, the value will be zero.
Units Numeric Maximum Max. Fault Number
[% Out
p
ut Power]
Parameter # 3 Factory Default None
[%
Output
Power]
Parameter Type Read Only Minimum 0 %
This parameter displays the percent of drive rated output
power.
Units 1 % Maximum 200% Drive Rated
Power
[% Out
p
ut Curr]
Parameter # 2 Factory Default None
[%
Output
Curr]
Parameter Type Read Only Minimum 0 %
This parameter displays the percent of drive rated output
current.
Units 1 % Maximum 200% of Rated Drive
Output Current
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive