4 1336 PLUS II Firmware Download Module
C. Verify the files using the information below.
To properly complete all download functions, certain
information contained in a “readme” file must be read and
recorded. The “readme” file will have the same version
number and a “.txt” file type (i.e. Read1004.txt). You should
obtain both files (i.e. V_x.xxxf.bin and Readxxxx.txt).
Important:
Verify that the “.bin” file has an “f”
(V_x.xxx
f.xxx). If you cannot locate the correct
file, contact your local Sales Office.
If you obtained the files on a floppy disk, proceed to step 9.
D. Select the first file to initiate the save dialog box. Select a
convenient location on your computer to save the file, then
choose “Save.” Repeat for the second file. Exit your browser
software.
9. Locate the readme file on your computer using Windows
Explorer. “Double-click” on the file to open/view it. The file
information will be displayed on the screen, along with any notes
concerning software changes or installation tips.
Record the information below and close the window.
V_ 1 . 004 f .bin
Version
Major Revision
Level
Minor Revision
Level
Serial Flash
Version File Type
Major rev levels
may include new
features, updated
drive identification
(newly released
sizes) or software
corrections.
Minor revs may
include corrections
to languages, etc.
The file for a 1336
PLUS II Drive must
have an “f.”
bin=binary
txt=text
Item Readme File Information
Current Drive Firmware
(will be completed in Step 15)
File Name
Firmware Revision
Boot Block
DSP Main Block
To Next Page
Loading...
Need help?
General
