To Next PageTo Next PageHow to troubleshoot Allen-Bradley Control Unit when module status is off?
If the module status is off, it indicates that no power is applied to the device. To resolve this, check the power supply to ensure it is functioning correctly.
What to do if Allen-Bradley Control Unit network status is flashing red?
A flashing red network status indicates that one or more I/O connections are in a timed-out state. You should check all I/O connections to resolve this issue.
What to do if Allen-Bradley Control Unit module status is flashing red?
If the module status is flashing red, this indicates a recoverable fault. You should investigate and resolve the fault to return the module to normal operation.
Why is the Allen-Bradley Control Unit network status off?
If the network status is off, it means the device is not online or hasn't completed the duplicate MAC ID test. Ensure the device is powered and check the module status indicator.
Why is Allen-Bradley Control Unit module status flashing green?
A flashing green module status indicates that the device needs commissioning because the configuration is missing or incorrect. Complete the commissioning process to resolve this.
What does it mean when Allen-Bradley Control Unit network status is red?
A red network status indicates a critical link failure or a failed communication device. You should investigate the communication device to identify and fix the issue.
What does Allen-Bradley Control Unit network status flashing red/green mean?
A flashing red/green network status indicates a communication faulted device, meaning the device has detected a network access error. You should resolve the communication fault to restore normal operation.
What to do if Allen-Bradley Control Unit module status is red?
If the module status is red, this indicates an unrecoverable fault that may require device replacement. Replace the device.
General| Brand | Allen-Bradley |
|---|---|
| Model | 1734-OB2 |
| Category | I/O Systems |
| Language | English |
