Allen-Bradley 1734-OE4C User Manual

Installation Instructions
POINT I/O 4 Channel Analog Current
Output Module
Catalog numbers 1734-OE4C
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
Before You Begin 6
Install the Mounting Base 8
Install the Module 9
Install the Removable Terminal Block 11
Remove a Mounting Base 13
Wire the Module 14
Communicate with Your Module 15
Interpret Status Indicators 16
Specifications 17

Allen-Bradley 1734-OE4C Specifications

General

Category	I/O Systems
Manufacturer	Allen-Bradley
Number of Outputs	4
Shock	30 g
Housing Material	Plastic
Mounting	DIN Rail
Product Type	Analog Output Module
Module Type	Analog Output Module
Resolution	15-bit
Isolation Voltage	50V continuous
Operating Temperature	-20 to 60 °C (-4 to 140 °F)
Storage Temperature	-40 to 85 °C (-40 to 185 °F)
Relative Humidity	5-95% non-condensing
Vibration	5-500 Hz
Weight	0.1 kg (0.22 lb)
Certifications	CE

Summary

Important User Information

Environment and Enclosure

Preventing Electrostatic Discharge

Guidelines for handling equipment to prevent damage from static discharge.

North American Hazardous Location Approval

European Hazardous Location Approval

Before You Begin

Install the Mounting Base

Install the Module

Install the Removable Terminal Block

Remove a Mounting Base

Install a 1734-TOPS Base

Remove a 1734-TOPS Base

Wire the Module

Communicate with Your Module

Interpret Status Indicators

Specifications

General Specifications

Environmental Specifications

Certifications

Rockwell Automation Support

Installation Assistance

Contact for initial help with getting product up and running within 24 hours.

New Product Satisfaction Return

Procedures for returning products that are not functioning.

Documentation Feedback

Provide suggestions for improving the manual.