POINT I/O 4 Channel Analog Current Output Module 17
Publication 1734-IN034C-EN-E - August 2016
Specifications
Output Specifications
Attribute Value
Number of outputs 4 analog, single-ended, non-isolated
Resolution current 16 bits – over 0…21 mA
0.32 μA/cnt
Output current terminal 0 mA output until communication established
4…20 mA user configurable
0…20 mA user configurable
Absolute accuracy
(1)
current
terminal, min
(1)
Includes offset, gain, non-linearity and repeatability error terms.
0.4% (0.1% if calibrated)
Accuracy drift w/temperature
current terminal
<50 ppm/°C
Resistive load on mA output 0…750 Ω
Conversion type Digital to analog converter
Conversion rate 1 μs
Data format Signed integer
Calibration Factory calibrated
Step response to 63% of
value, max
160 μs
Surge current 2 A for 10 ms, repeatable every 3 s
Status indicators, logic side 1 green/red network status
1 green/red module status
4 green/red output status
Refer to Publication 1734-SG001 for information on breaking the field
power distribution bus. Refer to sections “When to Use the Field Power
Distributor” and “When to Use the Expansion Power Unit”.
To Next Page
Loading...
