To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley 1734-OB8E and is the answer not in the manual?
General| Manufacturer | Allen-Bradley |
|---|---|
| Product Type | Output Module |
| Series | POINT I/O |
| Number of Outputs | 8 |
| Output Voltage | 24V DC |
| Output Current per Channel | 0.5A |
| Output Type | Sourcing |
| Communication Interface | EtherNet/IP |
| Isolation Voltage | 50V |
| Wire Size | 14-22 AWG |
| Certifications | CE, UL, CUL |
| Operating Temperature | -20 to 60 °C |
Details the 1734 digital modules and 1734D POINTBlock modules, listing their catalog numbers.
Describes DC and AC input modules, including their features like autobaud and sequential auto addressing.
Details DC and AC output modules, including current limitations, diagnostics, autobaud, and sequential auto addressing.
Explains the features of 1734-OW2, OW4, and OX2 relay output modules, including contact isolation and ratings.
Introduces analog input and output modules (1734-IE2C, IE2V, OE2C, OE2V) and their common features.
Details the procedure for installing the mounting base assembly on a DIN rail.
Explains how to install an I/O module into the mounting base, including keyswitch alignment.
Covers wiring for various POINTBlock modules like 8 DC In/8 DC Out and 8 AC In/8 AC Out.
Details digital input modules, including DC and AC types, and their features.
Covers digital DC and AC output modules, their features, and I/O message mapping.
Details analog input modules (IE2C, IE2V) and their operating modes and resolution.
Details analog output modules (OE2C, OE2V), their operational modes, and scaling.
Lists POINTBlock I/O modules, their termination types, and voltage ratings.
Explains node-level and point-level diagnostics reported via network adapters.
Details I/O status indications for digital modules, including probable causes and recommended actions.
Details channel status indications for analog modules, including probable causes and actions.
Explains status indications for communication modules, including probable causes and recommended actions.
Steps for configuring digital POINT I/O modules using RSNetWorx software.
Steps for configuring digital input modules using RSNetWorx software.
Steps for configuring analog POINT I/O modules using RSNetWorx software.
