To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley 1734-OW4 and is the answer not in the manual?
General| Manufacturer | Allen-Bradley |
|---|---|
| Product Type | Digital Output Module |
| Series | POINT I/O |
| Number of Outputs | 4 |
| Output Voltage Category | 24V DC |
| Enclosure | None (open-style) |
| Voltage Rating | 24 VDC |
| Isolation Voltage | 500V AC |
| Output Type | Sourcing |
| Communication Interface | EtherNet/IP |
| Operating Temperature | -20…55 °C (-4…131 °F) |
| Temperature Rating | -20…55 °C (-4…131 °F) |
| Weight | 0.2 kg |
Describes how to install, configure, and troubleshoot POINT I/O modules.
Provides steps for installing the mounting base assembly on a DIN rail.
Explains how to install POINT I/O modules into the mounting base.
Covers wiring diagrams and connections for various digital input and output modules.
Provides wiring diagrams and connections for analog input and output modules.
Provides a step-by-step guide to calibrating analog current input modules.
Details the procedure for calibrating analog current output modules.
Outlines the steps for calibrating analog voltage input modules.
Provides guidance on troubleshooting digital module I/O status indicators.
Explains how to troubleshoot analog modules using channel status indicators.
Guides troubleshooting for communication modules like PDN and adapters.
