Allen-Bradley 1734-IE2C - User Manual

Installation Instructions
POINT I/O 2 Current and 2 Voltage Input
Analog Modules
Catalog numbers 1734-IE2C,1734-IE2V, Series C
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
North American Hazardous Location Approval 4
European Hazardous Location Approval 5
Before You Begin 6
Install the Mounting Base 8
Install the Module 9
Install the Removable Terminal Block 10
Wire the Module 12
Communicate with the Module 14
Interpret Status Indicators 15
Specifications 17

Allen-Bradley 1734-IE2C Specifications

General

Brand	Allen-Bradley
Model	1734-IE2C
Category	I/O Systems
Language	English

Summary

Important User Information

Environment and Enclosure

Preventing Electrostatic Discharge

Guidelines to prevent internal damage and ensure normal operation by avoiding electrostatic discharge.

North American Hazardous Location Approval

European Hazardous Location Approval

Before You Begin

Install the Mounting Base

Install the Module

Install the Removable Terminal Block

Remove a Mounting Base

Wire the Module

Communicate with the Module

Interpret Status Indicators

Specifications

General Specifications

Environmental Specifications

Certifications

Rockwell Automation Support

Installation Assistance

Contact customer support for initial help in getting your product up and running.

New Product Satisfaction Return

Procedures for returning products that are not functioning after shipment.

Documentation Feedback

Provide comments to improve documentation by completing a feedback form.