7–11Application Examples
Publication
17476.6 - July 1996
In the following example, a Catalog Number 2711-KC1 PanelView
terminal is used to control a pump and display its ON/OFF status and
pressure. The pump is connected to an output module and a pressure
gauge is connected to an analog input module.
The system consists of:
• a Catalog Number 1747-L524 processor (SLC 5/02) in slot 0
• a Catalog Number 1747-SN scanner (RIO Scanner) in slot 1
• an output module in slot 2
• an analog input module in slot 3
• a pump connected to the output module
• a pressure gauge connected to the input module
• a Catalog Number 2711-KC1 PanelView terminal
RIO
Scanner
PanelV
iew Operator T
erminal
Pump
Pressure Gauge
Output Module
Analog Input Module
SLC 5/02 Processor
PanelView
To Next Page
Loading...