3–2 Installation and Wiring
Publication
17476.6 - July 1996
Below are supported baud rates and switch positions:
Baud Rate DIP Switch Position
Switch 1 Switch 2
57.6K baud on on
115.2K baud on off
230.4K baud off on
230.4K baud off off
The figure below shows the location of the DIP switches on the
scanner. Also, the DIP switch settings are shown for each baud rate.
Important: For proper RIO link system operation, all devices must
be configured for the same baud rate.
Baud
Rate
DIP Switch
57.6K baud 115.2K baud
230.4K baud 230.4K baud
12
N
O
12
N
O
12
N
O
12
N
O
➀
➀
This is the default position as shipped from the factory
.
Baud Rate Selection
To Next Page
Loading...