Allen-Bradley 1747-SN - Page 5

Preface P–3
Publication 17476.6 - July 1996
For Read This Document
Document
Number
An overview of the SLC 500 family of products SLC 500 System Overview 17472.30
A description on how to install and use your Modular SLC 500
programmable controller
Installation & Operation Manual for Modular
Hardware Style Programmable Controllers
17476.2
A procedural manual for technical personnel who use APS to
develop control applications
Rockwell Software Advanced Programming
Software (APS) User Manual
9399APSUM
A reference manual that contains status file data and instruction set
information for the SLC 500 processors and MicroLogix 1000
controllers.
SLC 500t and MicroLogix 1000t Instruction Set
Reference Manual
17476.15
An introduction to APS for firsttime users, containing basic
concepts but focusing on simple tasks and exercises, and allowing
the reader to begin programming in the shortest time possible
APS Quick Start for New Users 9399APSQS
A training and quick reference guide to APS
SLC 500 Software Programmer's Quick Reference
Guideavailable on PASSPORT at a list price of
$50.00
ABT1747TSG001
A guide of common procedures used in APS.
SLC 500 Common Procedures Guideavailable on
PASSPORT at a list price of $50.00
ABT1747TSJ50
A procedural and reference manual for technical personnel who
use an HHT to develop control applications
AllenBradley HandHeld Terminal User Manual 1747NP002
An introduction to HHT for firsttime users, containing basic
concepts but focusing on simple tasks and exercises, and allowing
the reader to begin programming in the shortest time possible
Getting Started Guide for HHT 1747NM009
An article on wire sizes and types for grounding electrical
equipment
National Electrical Code
Published by the
National Fire
Protection
Association of
Boston, MA.
A complete listing of current AllenBradley documentation,
including ordering instructions. Also indicates whether the
documents are available on CDROM or in multilanguages.
AllenBradley Publication Index SD499
A glossary of industrial automation terms and abbreviations AllenBradley Industrial Automation Glossary AG7.1
The following conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not procedural
steps.
• Numbered lists provide sequential steps or hierarchical
information.
• Italic type is used for emphasis.
• Text in this font indicates words or phrases you should type.
• Key names match the names shown and appear in bold, capital
letters within brackets (for example,
[ENTER]).
• A function key icon matches the name of the function key you
should press, such as
CONFIG
OFFLINE
CONFIG
SAVE &
EXIT
F8
.
We also use this convention to call attention to helpful information.
Common Techniques Used in
this Manual
"