108 Rockwell Automation Publication 1756-UM540E-EN-P - December 2017
Chapter 5 1756-OF8I Isolated Analog Output Module
Issue: Incorrect output behavior on response
1. Verify that only one of the connections to the Output module has the
.OwnerClaim output set to true (1).
2. Verify that only one of the connections to the Output module has the
.OwnerReady output set to true (1).
For all of the issues described in this section, you can consult product manuals,
Rockwell Automation® KnowledgeBase, and Rockwell Automation Technical
Support.
To Next Page
Loading...
Need help?
General
