Allen-Bradley 1756-IT16 User Manual

126 Rockwell Automation Publication 1756-UM540E-EN-P - December 2017
Chapter 7 Configure ControlLogix Analog I/O Modules
Create a New Module
After you create a Logix Designer application project, complete the following
steps to create a module in the project.
1. Right-click I/O Configuration and choose New Module.
2. Select the module and click Create.
3. Click OK to accept the default major revision.
The New Module dialog box appears.
TIP
You can verify the module’s revision in RSLinx® Classic software.

Allen-Bradley 1756-IT16 Specifications

General

Brand	Allen-Bradley
Model	1756-IT16
Category	I/O Systems
Language	English