I–2 Index
Publication 1794-6.5.12 - November 1997
K
keyswitch positions, 2-8
L
low voltage directive, 2-2
M
manual calibration, 6-2
mapping
1794IRT8, 4-3, 5-3
data, 5-3
mapping data, 4-3
module
shipping state
calibration, 6-1
module fault, 5-2
module features, 1-3
module installation, 2-4, 2-8
mounting
on terminal base, 2-8
mounting kit
cat. no. 1794NM1, 2-6
O
offset calibration, 6-7
optimal defaults, 5-11
P
panel/wall mounting, 2-6
PLC2 family processor, 3-2
PLC3 family processor, 3-2
PLC5 family processor, 3-3
PLC5/250 processor, 3-4
preparing for calibration, 6-2
R
range, selecting, 4-2
read/write words, for calibration, 6-5
removing and replacing
under power (RIUP), 2-8
RTD analog input mapping
1794IR, 4-3
RTD wiring example, 2-12
S
sensor types, 4-2
software
DeviceNetManager, 5-1
specifications, A-1
status indicators, 2-13
system throughput, 5-3
T
TC/RTD/mV input mapping
1794IRT8, 5-3
TC/RTD/mV input module
specifications, A-1
terminal bases, compatible, 2-9
thermocouple wiring example, 2-12
tools, calibration, 6-2
W
wall/panel mounting, 2-6
wiring
connections, 6-3
methods of, 2-3
wiring connections, 2-9
1794IRT8, 2-11, 6-3
Allen-Bradley PLCs
To Next Page
Loading...
