Publication
1794-6.5.7 – April 1997
The information below summarizes the changes to the
company-wide templates since the last release.
The following new information has been added to this manual:
• the “L” type thermocouple selection has been added for use in
some European markets.
Calibration procedures have been revised to eliminate 1 method in
order to better control calibration results.
Change Bars
The areas in this manual which are different from previous editions
are marked with change bars (as shown to the right of this paragraph)
to indicate the addition of new or revised information.
New Information
Updated Information
To Next Page
Loading...
