Allen-Bradley A Series - User Manual

Installation Instructions
DeviceNet ArmorBlock™ Network
Powered 16-input Module
Catalog number 1732D-IBDPM12MND, Series A
Table of Contents
Topic Page
Important User Information 2
Environment and Enclosure 3
Preventing Electrostatic Discharge 3
About the Module 4
Catalog Number Explanation 5
Install the Module 5
Set the Node Address 5
Mount the Module 6
Connect the Cordsets 8
Communicate with the Module 9
Interpret Status Indicators 10
Specifications 12

Allen-Bradley A Series Specifications

General

Voltage	600V AC
Category	Switch
Series	A
Type	Disconnect Switch
Contact Configuration	3P
Terminal Type	Screw
Housing Material	Plastic
IP Rating	IP65

Summary

Important User Information

Environment and Enclosure

Preventing Electrostatic Discharge

About the Module

Catalog Number Explanation

Install the Module

Set the Node Address

Instructions for setting the unique address for the module on the DeviceNet network.

Mount the Module

Node Address Default Setting

Module Dimensions

Mount the Module in High Vibration Areas

Connect the Cordsets

Communicate with the Module

Interpret Status Indicators

Indicator Status for Modules

General Specifications

Environmental Specifications

Certifications

Installation Assistance

Rockwell Automation Support

New Product Satisfaction Return