Need help?Do you have a question about the Allen-Bradley Stratix 8300 and is the answer not in the manual?
General| Model | Stratix 8300 |
|---|---|
| Ports | Fiber |
| Power Supply | Dual power supply options available |
| Input Voltage | 24 VDC |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Layer | Layer 3 |
| Management | Web browser, Command-line interface (CLI), SNMP |
| Protocols | EtherNet/IP, Modbus TCP, RSTP |
| Mounting | DIN Rail |
| Redundancy | Yes |
| Security | RADIUS, 802.1X, port security |
| Dimensions | Varies by model |
| Weight | Varies by model |
Procedure for initial IP address configuration using Express Setup for managed switch use.
Description of the Device Manager Web interface for switch configuration and monitoring.
Explanation of Virtual Local-Area Networks (VLANs) for network segmentation and user grouping.
Step-by-step guide to accessing the Device Manager Web interface for switch configuration.
Instructions for creating, modifying, and deleting VLANs on the switch.
Procedure to add the switch to the controller's I/O tree in RSLogix 5000.
Running switch and link diagnostic tests to resolve detected issues.
Procedures for restarting or resetting the switch to factory defaults to resolve issues.
To Next Page
