Allen-Bradley Stratix 5200 1783-CMS10DP - User Manual

Installation Instructions
Original Instructions
Stratix 5200 Ethernet Managed Switches
Catalog Numbers 1783-CMS6B, 1783-CMS6P, 1783-CMS10B, 1783-CMS10P, 1783-CMS10DP, 1783-CMS10DN, 1783-CMS20DB, 1783-CMS20DP, 1783-CMS20DN
Topic Page
Parts List 5
Required Tools 5
Site Requirements 5
Mount the Switch 6
Ground the Switch 7
Wire the DC Power Source 7
Install the Power Connectors on the Switch 8
Wire External Alarms 9
Connect to Console Ports 11
Install or Remove the SD Card 12
Install or Remove the SD Card 12
Install or Remove an SFP Module 12
Connect to 10/100 and 10/100/1000 Ports 13
Connect to 10Base-T, 100Base-TX, or 1000Base-T Ports 14
Connect to SFP Module Ports 13
Connect to a Dual-purpose Port 13
Confirm Installation 14
Remove the Switch from the DIN Rail 14
Specifications 15
Additional Resources 15

Allen-Bradley Stratix 5200 1783-CMS10DP Specifications

General

Model	Stratix 5200
Part Number	1783-CMS10DP
Type	Managed Switch
Ports	10
Mounting	DIN Rail
Port Type	10/100/1000 Mbps RJ45
Operating Temperature	-40°C to 70°C
Protocol Support	EtherNet/IP
Certifications	CE, UL, cUL

Summary

North American Hazardous Location Approval

UK and European Hazardous Location Approval

Parts List

Required Tools

Lists the tools needed for installation and setup of the Stratix 5200 switch.

Site Requirements

Mount the Switch

Ground the Switch

Wire the DC Power Source

Install the Power Connectors on the Switch

Wire External Alarms

Connect to Console Ports

USB Micro-Type B Console Port

RJ-45 Console Port

Confirm Installation

Specifications