Allen-Bradley Stratix 5200 1783-CMS20DP - User Manual

Installation Instructions
Original Instructions
Stratix 5200 Ethernet Managed Switches
Catalog Numbers 1783-CMS6B, 1783-CMS6P, 1783-CMS10B, 1783-CMS10P, 1783-CMS10DP, 1783-CMS10DN, 1783-CMS20DB, 1783-CMS20DP, 1783-CMS20DN
Topic Page
Parts List 5
Required Tools 5
Site Requirements 5
Mount the Switch 6
Ground the Switch 7
Wire the DC Power Source 7
Install the Power Connectors on the Switch 8
Wire External Alarms 9
Connect to Console Ports 11
Install or Remove the SD Card 12
Install or Remove the SD Card 12
Install or Remove an SFP Module 12
Connect to 10/100 and 10/100/1000 Ports 13
Connect to 10Base-T, 100Base-TX, or 1000Base-T Ports 14
Connect to SFP Module Ports 13
Connect to a Dual-purpose Port 13
Confirm Installation 14
Remove the Switch from the DIN Rail 14
Specifications 15
Additional Resources 15

Allen-Bradley Stratix 5200 1783-CMS20DP Specifications

General

Series	Stratix 5200
MPN	1783-CMS20DP
Number of Ports	20
Mounting Type	DIN Rail
Port Type	Ethernet
Power Supply	24V DC
Operating Temperature	-40 to 70 °C
Certifications	CE, UL
Ports	Sixteen (16) 10/100BASE-T ports, Four (4) 100/1000BASE-X SFP ports

Summary

Mount the Switch

Ground the Switch

Wire the DC Power Source

Install the Power Connectors on the Switch

Wire External Alarms

Install the Alarm Relay Connector on the Switch

Connect to Console Ports

Install or Remove an SFP Module

Confirm Installation

Specifications