To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley Stratix 5200 1783-CMS10DN and is the answer not in the manual?
General| Brand | Allen-Bradley |
|---|---|
| Model | Stratix 5200 1783-CMS10DN |
| Category | Switch |
| Language | English |
Safety and operational guidelines for hazardous environments in North America.
Lists all components included with the Stratix 5200 switch.
Outlines the necessary tools for installing the switch.
Specifies environmental and physical conditions for switch installation.
Instructions for physically attaching the switch to a DIN rail.
Procedures for properly grounding the switch for safety.
Steps to connect the switch to a DC power source.
Guidance on connecting power cables to the switch's power receptacle.
Instructions for wiring external alarm input and output circuits.
Procedure to attach the alarm relay connector to the switch front panel.
Details on connecting to the switch's console ports for management.
Steps for using the USB micro-Type B console port for connectivity.
Steps for using the RJ-45 console port for connectivity.
Instructions for managing the SD card on the switch.
Procedures for installing and removing SFP modules for network connectivity.
How to connect fiber-optic cables to SFP module ports.
Information on using ports that support both RJ45 and SFP connections.
Guidance on connecting devices to the switch's Ethernet ports.
Detailed steps for connecting to specific Ethernet port types.
Steps to verify that the switch is installed and functioning correctly.
Instructions for safely detaching the switch from its mounting rail.
Technical specifications for the Stratix 5200 series switches.
Links and references to further documentation and support.
