To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley Stratix 5800 and is the answer not in the manual?
General| Model | Stratix 5800 |
|---|---|
| Series | Stratix |
| Layer | Layer 2 and Layer 3 |
| Weight | Varies by model |
| Category | Industrial Ethernet Switch |
| Port Types | 10/100/1000 Mbps Ethernet |
| Power over Ethernet (PoE) | Yes |
| Power Supply | Dual DC power inputs |
| Input Voltage | 24V DC |
| Operating Temperature | -40°C to 70°C (-40°F to 158°F) |
| Redundancy | Yes, with RSTP/MSTP |
| Dimensions | Varies by model |
| Mounting | DIN rail |
| Protocols | EtherNet/IP |
| Security Features | port security, Access Control Lists (ACLs) |
| Management | Web-based, CLI, SNMP |
Guidelines to prevent damage from electrostatic discharge when handling equipment.
Note regarding proper grounding of the switch and expansion module via the DIN rail.
Notice for Class A Information Product regarding potential RF interference in residential areas.
Information for use in hazardous locations within Europe, including ATEX directive compliance.
Information for use in hazardous locations within North America, including NEC/CEC compliance.
List of items included with the Stratix 5800 switch package.
List of tools necessary for the installation and configuration of the switch.
Conditions and environmental factors to consider before installing the switch.
Steps to connect an expansion module to an expandable switch model.
Instructions for securely mounting the switch onto a DIN rail.
Procedure for connecting the DC power source to the switch.
Steps for installing the power connectors onto the switch.
Instructions for wiring external alarm devices to the switch alarm connector.
Guide for installing or removing Small Form-factor Pluggable (SFP) modules.
Procedure for installing or removing the SD card for firmware or configuration storage.
Instructions for connecting devices to the switch's Ethernet ports.
Steps to connect a fiber-optic cable to an installed SFP module.
Steps to verify the successful installation and startup of the switch.
Procedure for safely removing the switch from its DIN rail mounting.
Technical specifications for Stratix 5800 Ethernet Managed Switches.
List of related documents and resources for further information.
