Need help?Do you have a question about the Allen-Bradley Stratix 5700 and is the answer not in the manual?
General| Model | Stratix 5700 |
|---|---|
| Port Types | RJ45, SFP |
| Mounting | DIN Rail or Panel Mount |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Management | Web-based, SNMP, Command Line |
| Redundancy | Device Level Ring, STP, RSTP |
| Operating Temperature | -40°C to 70°C |
| Power Supply | Dual DC inputs |
| Input Voltage | 24 VDC or 100-240 VAC |
| Protocols | EtherNet/IP, DLR |
| Security Features | SSH, HTTPS, RADIUS, TACACS+ |
Outlines initial switch setup tasks including IP assignment and global macro configuration.
Steps to configure network settings via Device Manager after Express Setup.
Device Manager is a web-based tool for configuring, monitoring, and troubleshooting switches.
Details grounding procedures for the switch.
Explains ACLs for filtering traffic and controlling network access by permitting or denying packets.
Details DLR availability on specific Stratix switches and topics covered in the section.
Describes NAT as a service that translates IP addresses, useful for reusing IP addresses.
Explains how to assign VLANs to NAT instances and considerations for assignments.
Provides steps to recover switch firmware if it is corrupted or deleted due to a failed update.
To Next Page
