Allen-Bradley Stratix 5200 1783-CMS20DB - User Manual

Installation Instructions
Original Instructions
Stratix 5200 Ethernet Managed Switches
Catalog Numbers 1783-CMS6B, 1783-CMS6P, 1783-CMS10B, 1783-CMS10P, 1783-CMS10DP, 1783-CMS10DN, 1783-CMS20DB, 1783-CMS20DP, 1783-CMS20DN
Topic Page
Parts List 5
Required Tools 5
Site Requirements 5
Mount the Switch 6
Ground the Switch 7
Wire the DC Power Source 7
Install the Power Connectors on the Switch 8
Wire External Alarms 9
Connect to Console Ports 11
Install or Remove the SD Card 12
Install or Remove the SD Card 12
Install or Remove an SFP Module 12
Connect to 10/100 and 10/100/1000 Ports 13
Connect to 10Base-T, 100Base-TX, or 1000Base-T Ports 14
Connect to SFP Module Ports 13
Connect to a Dual-purpose Port 13
Confirm Installation 14
Remove the Switch from the DIN Rail 14
Specifications 15
Additional Resources 15

Allen-Bradley Stratix 5200 1783-CMS20DB Specifications

General

Model	1783-CMS20DB
Series	Stratix 5200
Category	Switch
Ports	20
Connector Type	RJ45, SFP
Layer	Layer 2
Power Supply	24V DC
Mounting Type	DIN Rail
Humidity	5% to 95% non-condensing
Port Type	10/100/1000 Mbps
Operating Temperature	-40 to 70°C (-40 to 158°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Certifications	CE, cULus, ATEX, IECEx

Summary

North American Hazardous Location Approval

UK and European Hazardous Location Approval

Parts List

Mount the Switch

Ground the Switch

Wire the DC Power Source

Install the Power Connectors on the Switch

Wire External Alarms

Install the Alarm Relay Connector on the Switch

Connect to Console Ports

Install or Remove the SD Card

Install or Remove an SFP Module

Connect to SFP Module Ports

Connect to a Dual-purpose Port

Connect to 10;100 and 10;100;1000 Ports

Connect to 10 Base-T, 100 Base-TX, or 1000 Base-T Ports

Confirm Installation

Remove the Switch from the DIN Rail