Allen-Bradley Stratix 8300 User Manual

Rockwell Automation Publication 1783-UM003G-EN-P - December 2012 71
Manage the Switch via the Device Manager Web Interface Chapter 3
Configure DHCP
Persistence
To use DHCP persistence, you must first enable DHCP and set up the IP address
pool. Then you must assign a specific IP addresses to each port.
Set up the DHCP Server
To enable or disable the DHCP Server mode on the switch, do the following.
1. Choose Configure>DHCP from the Device Manager Web interface.
2. Check Enable DHCP.
Check Enable DHCP.

Allen-Bradley Stratix 8300 Specifications

General

Brand	Allen-Bradley
Model	Stratix 8300
Category	Switch
Language	English