Produce and Consume a Tag
Rockwell Automation Publication 1756-PM011J-EN-P - February 2018 27
Unicast connections are point-to-point connections between a producing
controller and consuming controller; no multiple connections. Unicast
connections do not require a minimum or maximum RPI range or default
RPI value.
The Allow Unicast Consumer Connections check box at the bottom of the
Advanced Options dialog box is selected by default to allow multiple
unicast consumers to consume from the produced tag.
Clear the Allow Unicast Consumer Connections check box if you are not
using Unicast and the controller is running low on controller memory.
Additional producer resources are allocated for each potential consumer
when the check box is selected.
option
To Next Page
Loading...
