Need help?Do you have a question about the Allen-Bradley Logix5000 and is the answer not in the manual?
General| Brand | Allen-Bradley |
|---|---|
| Model | Logix5000 |
| Category | Controller |
| Language | English |
Details the capabilities of EtherNet/IP communication modules.
Provides a functional overview of the 5069-AEN2TR EtherNet/IP adapter.
Explains the use of SD cards for configuration data storage on the adapter.
Describes how the adapter provides power to the 5069 Compact I/O system.
Details system-side power for modules and logic execution.
Details field-side power for modules and connected devices.
Guidance on monitoring SA power bus current draw per module and system.
Explains using the 5069-FPD to create additional SA power buses.
Illustrates creating a second SA power bus using a field potential distributor.
Provides further recommendations and notes regarding SA power connections.
Steps to set up the Ethernet driver in RSLinx Classic for network operation.
Steps to install and configure the USB driver in RSLinx Classic software.
Defines essential network parameters like IP address, subnet mask, and gateway.
Explains how to use DNS addressing for module hostnames and domain names.
Methods for setting the module's network IP address using rotary switches or software.
Procedure for assigning an IP address using a BOOTP/DHCP server.
How the adapter detects and indicates duplicate IP addresses on the network.
Methods to resolve detected duplicate IP address conflicts.
Steps to configure the adapter using RSLinx Classic software via the USB port.
Steps to add the communication module to a Logix Designer controller project.
Explains I/O module synchronization with the adapter and master clock.
Defines the role and functions of the supervisor node in a DLR network.
Defines the role and functions of a standard ring node in a DLR network.
Diagnose adapter issues using Logix Designer application's Module Properties.
View connection status between controller and adapter in Logix Designer.
View module identity and status information in Logix Designer.
View and restart communication status for adapter ports.
View CIP Sync time synchronization information in Logix Designer.
View diagnostic information using RSLinx software tabs.
View port status and interface/media counter information in RSLinx.
View connection manager properties and counters in RSLinx.
View adapter USB object information in RSLinx.
Access and monitor adapter status via web pages.
Steps to access adapter diagnostic web pages using a browser.
View adapter status and resource utilization on the diagnostic page.
View network interface, Ethernet interface, and port settings.
View communication activity status on the Ethernet network.
View the status of the Device-level Ring network.
Procedure to reset the adapter to factory default values.
Overview of status indicators on the 5069-AEN2TR EtherNet/IP adapter.
Information displayed on the adapter's 4-character display during operation.
Description of various adapter status indicators like OK, SD, NET, LINK, MOD, SA Power.
List and definition of module tags created in Logix Designer for the adapter.
To Next Page
