Allen-Bradley Micro810 User Manual

Rockwell Automation Publication 2080-UM001B-EN-E - November 2011 57
Quickstarts Appendix E
4. Press the UP arrow button once to navigate to the function block
controlling Output 1.
5. Press the RIGHT arrow button once. The instruction parameter field is
selected and shows the CTU instruction.
6. Press the RIGHT arrow button once to select the CLK parameter field.
This parameter triggers counting.
7. Press the RIGHT arrow button once to select the RESET parameter field.
This parameter input forces a counter reset.
8. Press the RIGHT arrow button thrice to move to the first non-zero entry
in the Preset Value (PV) parameter field.
a. Press the UP arrow button twice to turn this digit to zero.
b. Press RIGHT arrow button once to position to the next non-zero digit
in the PV field. Press the UP arrow button twice to get the digit value of
zero.
UP
RIGHT

Allen-Bradley Micro810 Specifications

General

Brand	Allen-Bradley
Model	Micro810
Category	Controller
Language	English