123Rockwell Automation Publication 2080-UM005B-EN-E - March 2015 123
Appendix
B
Troubleshooting
Status Indicators on the
Controller
Status indication on the Micro820 controller is as follows.
Status Indicator Description
Description State Indicates
1 Input status Off Input is low.
On Input is energized (terminal status).
2 Fault status Off No fault detected.
Red Controller hard fault.
Flashing red Major fault detected.
3 Run status Green Executing the user program in run mode.
Flashing Green (1 Hz) The controller is in program mode.
4 Serial
communications
status
Off No traffic for RS232/RS485.
Green Traffic through RS232/RS485.
5 Force status Off No force conditions are active.
Amber Force conditions are active.
Input status
Run status
Fault status
Force status
Comm status
ENET status
SD status
Output status
46207
To Next Page
Loading...
