Preface
MicroLogix 1000 Programmable Controllers User Manual
E–2
Paper Drilling Machine Application Example
For a detailed explanation of:
• XIC, XIO, OTE, RES, OTU, OTL, and OSR instructions, see chapter 6.
• EQU and GEQ instructions, see chapter 7.
•
CLR, ADD, and SUB instructions, see chapter 8.
•
MOV and FRD instructions, see chapter 9.
•
JSR and RET instructions, see chapter 10.
• INT and SQO instructions, see chapter 11.
•
HSC, HSL, and RAC instructions, see chapter 12.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
