Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 121
Appendix
C
PVc DesignStation in
Connected Components Workbench
About PVc DesignStation
PVc DesignStation is a component within the Connected Components
Workbench software that allows you to create applications for PanelView 800
terminals. You can create applications in Connected Components Workbench
without being connected to a terminal but you can only run the application on a
physical terminal. Applications created with Connected Components
Workbench can be downloaded to the terminal through Ethernet, or transferred
using a USB flash drive or micro-SD storage card.
Connected Components Workbench
We strongly recommend that you validate the transferred application using the
terminal software before running the application. Non-validated applications,
when started on the terminal, display a reminder pop-up message that the
application is not validated. Applications designed for the CompactLogix 5370
controllers must be validated before running on the terminal.
You can download the latest version of Connected Components Workbench at
the URL below.
http://www.rockwellautomation.com/products-technologies/connected-compo
nents/tools/workbench.page.
To Next Page
Loading...
Need help?
General
