Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 23
Configuration Mode Chapter 2
Select a Terminal Language
You can change the terminal display language. The terminal is shipped with the
English, Portuguese, French, Italian, German, Spanish, and Chinese fonts
installed. Korean is supported but you must first install the Korean font. See
Adding Font Files
on page 119 for information on how to install the font onto
the terminal.
Follow these steps to change the terminal language using PanelView Explorer.
(1)
1. Go to the PanelView Explorer Startup window.
2. Click the Terminal Settings link.
3. Click the System Information tab.
4. Select a language from the Terminal Language pull-down list.
5. Click Apply or click Cancel to restore the current setting.
At runtime, diagnostic messages appear in the same language as
the application if the application language is English, Portuguese,
French, Italian, German, Spanish, Chinese, or Korean. For all other
languages, the diagnostic messages appear in the configuration
language set on the terminal.
(1)
The PanelView Explorer feature is not supported on PanelView 800 terminals from firmware revision 3.011
onwards.
To Next Page
Loading...
Need help?
General
