Rockwell Automation Publication 20D-RN047A-EN-P - October 2019
3
Use DriveExplorer Lite/Full
1. Launch DriveExplorer™ and go online (via EtherNet/IP™ by using
DriveExplorer Full only, or a 1203-USB or 1203-SSS converter) with the
drive.
2. In the DriveExplorer treeview, click on the PowerFlex 700S 2 drive as
shown in Figure 1 -
Example DriveExplorer Window.
3. Click the information icon to display the Properties screen of the drive.
4. The Revision: field shows the present revision (for example, 4.002) of the
drive firmware.
5. The Series: field shows the series (for example, A) of the control board of
the drive.
Figure 1 - Example DriveExplorer Window
TIP
When clicking on the drive using version 5.01 or higher DriveExplorer Lite/Full, the
adapter firmware revision is also shown in the right pane of the DriveExplorer window.
To Next Page
Loading...
