Allen-Bradley PowerFlex 700S - Power Terminal Block Specifications; Frames 1-4 Terminal Block Locations

38 Rockwell Automation Publication 20D-TD002L-EN-P - July 2018
PowerFlex 700S Drives with Phase II Control
Power Terminal Block Specifications
Frames 1…4 Terminal Block Locations
No. Name Frame Description Wire Size Range
(2)
(2) Maximum/minimum sizes that the terminal block will accept - these are not recommendations.
Torque Terminal
Bolt Size
(3)
(3) Apply counter torque to the nut on the other side of terminations when tightening or loosening the terminal bolt in order to avoid damage to the terminal.
Maximum Minimum Maximum Recommended
1 Power Terminal Block 1 Input power and motor connections 4.0 mm
2
(10 AWG)
0.5 mm
2
(22 AWG)
1.7 N•m
(15 lb•in)
0.8 N•m
(7 lb•in)
—
2 Input power and motor connections 10.0 mm
2
(6 AWG)
0.8 mm
2
(18 AWG)
1.7 N•m
(15 lb•in)
1.4 N•m
(12 lb•in)
—
3 Input power and motor connections 25.0 mm
2
(3 AWG)
2.5 mm
2
(14 AWG)
3.6 N•m
(32 lb•in)
1.8 N•m
(16 lb•in)
—
BR1, BR2 10.0 mm
2
(6 AWG)
0.8 mm
2
(18 AWG)
1.7 N•m
(15 lb•in)
1.4 N•m
(12 lb•in)
—
4 Input power and motor connections 35.0 mm
2
(1/0 AWG)
10 mm
2
(8 AWG)
4.0 N•m
(24 lb•in)
4.0 N•m
(24 lb•in)
—
2 SHLD Terminal 1…4 Terminating point for wiring shields — — 1.6 N•m
(14 lb•in)
1.6 N•m
(14 lb•in)
—
3 AUX Terminal Block 1…4 Auxiliary Control Voltage
(1)
PS+, PS-
(1) External control power: UL Installation - 300V DC, ±10%, Non UL Installation - 270…600V DC, ±10%. Frame 1…6, 100 W
1.5 mm
2
(16 AWG)
0.2 mm
2
(24 AWG)
—— —
Frame 2
Frames 3 & 4
Frame 1
BR1
BR2
DC
DC
PE
U/T1
V/T2
W/T3
R/L1
S/L2
T/L3
Use 75C Wire Only
#10-#14 AWG
Torque to 7 in-lbs

DANGER
BR1 B
SHLD SHLD
V/T2 W/T3 PE R/L1 S/L2 T/L3
AUX IN+ AUX OUT–
Optional
Communications
Module
75C Cu Wire
6 AWG [10MM
2
] Max .
12 IN . LB S .
1.4 N-M
 T O R Q U E
WIRE
STRIP
CONT R OL
PO WER
BR1 BR2 DC+ DC- U/T1 V/T2 W/T3 R/L1 S/L2 T/L3
Optional
Communications
Module
PE B
PE A
75C Cu Wire
3 AWG [25MM
2
] Max.
16 IN. LBS.
1.8 N-M
 TORQUE
WIRE
STRIP
CONTROL
POWER
AUX IN
+ –
SHLD
SHLD
PE
75C Cu Wire
6 AWG [10MM
2
] Max.
BR1 BR2
12 IN. LBS.
1.4 N-M
 TORQUE
PE
3
1
1
2
3
2
2
3
1