Allen-Bradley PowerFlex 753 User Manual

Rockwell Automation Publication 750-QS001A-EN-P - March 2015 39
Reference Section
Table 8 - Control Screen Navigation/Number Keys
Label Key Function
JOG Jogs the host drive.

REF
Decreases the speed reference for the host drive.
HELP Displays Rockwell Automation Drives Technical Support direct phone number, website address, and email address.
REV  Sets the direction to reverse for the host drive.
EDIT REF Enables direct data entry of the speed reference for the host drive.
 FWD Sets the direction to forward for the host drive.
REMOVE HIM Allows HIM removal without causing a
fault if the HIM
is not the last controlling device. (The REMOVE HIM label is not available
when the HIM has manual control of the host drive. In this case, a fault occurs if the HIM is removed.)
REF

Increases the speed reference for the host drive.
MANUAL Switches between Auto and Manual modes.
Table 9 - Start and Stop Keys
Single-function Key Name Function
Start Starts the drive.
Stop • Stops the drive or clears a fault.
• This key is always active.
• This key is controlled by drive parameter 307 [Start Stop Mode].

Allen-Bradley PowerFlex 753 Specifications

General

Output Voltage	0 to input voltage
Humidity	5% to 95% non-condensing
Altitude	Up to 1000 m (3300 ft) without derating
Voltage	200-240V AC, 380-480V AC, 500-600V AC
Horsepower	1 to 250 HP
Enclosure	NEMA/UL Type 1, 12, IP20, IP30, IP54
Communications	EtherNet/IP, DeviceNet, ControlNet
Control Method	Sensorless Vector Control, V/Hz Control
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)