Allen-Bradley Rockwell Automation PowerFlex 700 Series User Manual

Rockwell Automation Publication PFLEX-AP005B-EN-P - May 2019 13
Drive Selection Considerations Chapter 1
PowerFlex Drive
Conversion Guide
The following tables are for migrating your PowerFlex 700 drive installation to a
PowerFlex 750-series drive.
Table 6 - PowerFlex 700 Drive to PowerFlex 750-Series Drive Conversions.
TIP
Voltage rating is 208V AC for all the drives that are listed.
PowerFlex 700 Drive
(1)
PowerFlex 750-Series Drive Conversion
(2)
20B Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
20F/
20G
Amps HP
(ND)
Frame Height
mm,
(in.)
Width
mm,
(in.)
Depth
mm,
(in.)
2P2 2.5 0.37 0
336
(13.22)
110
(4.33)
200
(7.87)
2P2 2.5 0.37 2
424.2
(16.7)
134.5
(5.29)
212
(8.34)
4P2 4.8 0.75 0 4P2 4.8 0.75 2
6P8 7.8 1.50 1
135
(5.31)
6P8 7.8 1.50 2
9P6112.20 1 9P6112.202
015 17.5 4 1 015 17.5 4 2
022 25.3 5.5 1 022 25.3 5.5 2
028 32.2 7.5 2 342.5
(13.48)
222
(8.74)
028 32.2 7.5 3
454
(17.87)
190
(7.48)
042 48.3 11 3
517.5
(20.37)
042 48.3 11 3
0525615 3 05256154474
(18.66)
222
(8.74)
070 78.2 18.2 4
759
(29.88)
220
(8.66)
202
(7.95)
07078.218.2 5
555
(21.85)
270
(10.62)
0809222 4 08092225
104 120 30 5
644.5
(25.37)
309
(12.16)
275.5
(10.84)
104 120 30 6
665.5
(26.2)
308
(12.12)
346.4
(13.63)
130 130 37 5 130 130 37 6
154 177 45 6
850
(33.46)
(3)
404
(15.9)
154 177 45 6
192 221 55 6 192 221 55 6
260 260 66 6 260 260 66 6
(1) All dimensions are IP20, NEMA/UL Type 1 unless specified otherwise.
(2) All dimensions are IP20, NEMA/UL Open type unless specified otherwise.
(3) Height dimension shown for a drive mounted in a cabinet; height dimension is 976.5 mm (38.4 in.) with required junction box if not cabinet-mounted.

Allen-Bradley Rockwell Automation PowerFlex 700 Series Specifications

General

Brand	Allen-Bradley
Model	Rockwell Automation PowerFlex 700 Series
Category	DC Drives
Language	English