To Next PageTo Next Page
Need help?Do you have a question about the Alliance Laundry Systems JTB75CG and is the answer not in the manual?
General| Brand | Alliance Laundry Systems |
|---|---|
| Model | JTB75CG |
| Category | Dryer |
| Heat Source | Gas |
| Fuel Type | Natural Gas |
Essential safety precautions to reduce risk of fire, electric shock, injury, or death.
Fields to record purchase date, model, serial number, and dealer information.
Illustrates where to find the tumbler's identification nameplate.
Details on how to obtain literature or replacement parts.
Provides overall cabinet dimensions, door opening, and clearance specifications.
Specifies locations and diameters for exhaust connections.
Details steam inlet and outlet connection points and sizes.
Shows gas connection points, diameter, across, and height measurements.
Indicates locations for electrical service connections for gas and electric models.
Detailed specifications for each tumbler model (gas, electric, steam).
Procedures for inspecting the tumbler upon delivery for shipping damage.
Lists necessary materials not supplied with the tumbler for installation.
Instructions on how to remove the tumbler from its skid and move it.
How to ensure the tumbler is perfectly level for optimal performance and stability.
Guidelines for building a safe and compliant enclosure around the tumbler.
Details on floor requirements, layout, and venting considerations.
Instructions for proper exhaust duct sizing, material, and installation for efficient drying.
Requirements and recommendations for providing adequate air supply for combustion and ventilation.
Specifies natural and L.P. gas supply pressure, piping, and connection requirements.
Details steam pressure, pipe sizing, and connection procedures for steam models.
Outlines electrical service, wiring, grounding, and breaker specifications for various models.
Procedure to adjust the air shutter for optimal burner flame and combustion.
Instructions for adjusting the air flow switch sensitivity for proper operation.
Procedures for adjusting the door switch and strike for proper operation and closure.
Instructions for adjusting belt tension for both belt and chain drive models.
Step-by-step guide for operating the manual dual timer control panel.
Instructions for operating coin drop and coin slide models.
Guide to operating tumblers with micro-control panels and custom cycles.
Explains the function of status indicators and the reversing operation feature.
Guides on selecting fabric type, temperature, and cycle modes (Auto, Time, Special, Custom).
How to adjust temperature, use security lock-out, and check temperature sensor status.
