Cleaning
Disconnect the washing machine from the power mains and open the door. Clean the washing machine
drum with a damp cloth and a mild detergent.
In the case of a 3 phase connection of the appliance, switch off the main socket switch.
Connect the washing machine to the power mains and run the dedicated drum cleaning program.
See chapter "WASHING PROCESS; STEP BY STEP (1–8)" /STEP 5: CHOOSE THE PROGRAM.
INFORMATION!
No program can be started while the door is open.
Settings before first use
When the dryer is connected (see chapter "INSTALLATION AND CONECTION") and switched on for
the first time, choose the preferred language:
For further washing process, see chapter "WASHING PROCESS STEP BY STEP".
INFORMATION!
The amount of detergent also depends on the hardness of water. For details, see the detergent
packaging. Please contact your local water supply company to check the water hardness in your
area.
INFORMATION!
Before the product is dispatched from the factory, every appliance is tested.
As a result, there may be some residual water left in the discharge pump filter. This, however,
does not affect the quality and will not damage the appliance.
13
To Next Page
Loading...
