Alliance Laundry Systems SC70 - Quick Guide

Quick guide
Sort the laundry.
Close the zippers. Empty the pockets and turn them inside out. Check the
laundry care symbols. Sort the laundry based on how heavily soiled it is, by
colour, and by material.
1.
Switch on the main ON/OFF switch
2.
Open the washing machine door and insert the laundry.
Before doing so, make sure the drum is empty.
3.
Add the detergent and the conditioner.
Recommended detergent amount is usually indicated on the packaging. For
smaller wash loads, use a smaller amount of detergent.
4.
Choose the washing program.
Turn the program selector knob to the desired washing program. Selected
program will be indicated on the display unit.
Maximum load is indicated on the rating plate (see PROGRAM TABLE in the
instruction manual).
5.
Choose the program settings
Program settings can be set for some programs. See chapter: SETTINGS
6.
Close the washing machine door and press the ”START” button.
Anticipated washing time, in hours and minutes, will be indicated on the display.
7.
End of program
Open the door and remove the laundry from the washing machine.
See chapter "CLEANING AND MAINTENANCE".
Close the door.
Switch off the main on/off switch.
Close the water tap and remove the power plug from the power socket (unless
you have a washing machine with a 3phase connection).
8.
51