Table continued from last page
DescriptionSettingOn display
Add Clothes function is available
in Wash phase on majority of the
programs.
Add clothes function is available
also on program Rinse (only
during first rinse on Rinse pro-
gram).
If water level is higher than al-
lowed to open door, water will
be pumped out.
If temp is higher than 50°C, them
add clothes option is not shown
when pausing the program.
Selection if appliance will go into
Standby after 5min or not.
No standby/NormStandby choice
By turning WiFi module On, the
energy consumption will in-
crease in standby mode.
WiFi settings
By changing settings it is pos-
sible to create and customize
your own program.
Settings can be changed on
each program.
Programs A - J
Program can be renamed!
32
To Next Page
Loading...
