•
To connect the washing machine to water supply, make sure
to use the supplied water supply hose and gaskets. Water
pressure has to be between 0.1 and 1 MPa (approximately
1–10 kp/cm
2
, 1-10 bar, 10–100 N/cm
2
).
•
Always use a new water supply hose to connect the
appliance to water supply; do not reuse an old water supply
hose.
•
After the washing cycle, close the water tap and pull out
the washing machine plug from the power socket.
If you have a washing machinewith a 3-phase connection,
do not pull the plug out of the power outlet.
•
Only use the washing machine for washing laundry, as
described in the instruction manual. The machine is not
intended for dry cleaning.
•
In case of incorrect appliance connection, incorrect use, or
servicing by an unauthorized person, the user shall bear the
cost of any damage.
•
Only use detergents intended for the washing machine!
•
Only use agents for machine washing and care of laundry.
We shall not be responsible for any damages or
discolouration of gaskets and plastic parts resulting from
incorrect use of bleaching or colouring agents.
•
Bleaches that contain chlorine can be replaced with
oxygen-based bleaches. Otherwise, a neutralization cycle
should be performed by running the Cotton program at the
highest temperature. For best results, use hydrogen peroxide
or oxygen-based detergents.
5
To Next Page
Loading...
